2

The module frame must be solid wood (no plywood or particle board)

1. Use 1x4 or 1x3 dimension lumber (pine, fir, poplar) for main structure framing (1x4 preferred for compatibility with other modules).

2. Joints must be glued and screwed (2"x7 wood screws or 2" drywall screws recommended). Longitudinal and lateral cross members must be used as needed for stability, track support, and to insure that light weight materials used for the module surface will not sag with age. Module ends must be square with the track center lines vertically and horizontally.

This document maintained by concept_models@con-sys.com.
Material Copyright © 2022 Concept Models